Ford Workshop Service and Repair Manuals > Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001) > Sensors and Switches | Sensors and Switches - Powertrain Management | Sensors and Switches - Computers and Control Systems | Digital Transmission Range Sensor <--> [Transmission Position Switch/Sensor, A/T] | Component Information | Specifications

Page 3

4. Connect the digital transmission range (TR) sensor electrical connector.

5. Connect the shift cable.

1. Connect the shift cable to the bracket.
2. Connect the shift cable to the manual control lever.

6. Verify that the shift cable is adjusted.
7. Lower the vehicle.
8. Connect the battery ground cable.

Ford Workshop Service and Repair Manuals