Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Alignment: Service and Repair
Ride Height
Ride Height - Front Suspension
1. Drive the vehicle onto a drive-on lift.
2. Jounce the vehicle's front and rear suspension to normalize the vehicle static ride height.
3. Measure the distance between the center line of the front suspension lower arm bushing bolt and the lift. Record the measurement.
4. Measure the distance between the front wheel spindle (lowest point) and the lift. Record the measurement.
5. Determine ride height.
^
Subtract measurement
1
from measurement
2. This is the ride height.