Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
3
Position the power steering fluid cooler and install the nuts.
14. Install the front stabilizer bar.
^
Orientate the front stabilizer bar as noted during removal.
15. Install the LH tie-rod end on the front wheel spindle tie-rod.
^
Rotate the tie-rod end the number of turns recorded during removal.
16. Connect the tie-rod ends to the steering knuckles.
1
Position the tie-rod ends on the steering knuckles.
2
Install the castellated nuts.
3
Install the new cotter pins.
^
Check that the brake dust shields are not bent and are not in contact with the outer tie-rod boot seals.
17. Tighten the tie-rod jam nuts.
18. Install the radiator air deflector.
1
Position the radiator air deflector.