Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
2. Install the transmission fluid filter screw.
6. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Align and install the transmission fluid pan.
-
Loosely install the transmission fluid pan screws.
7. Tighten the transmission fluid pan screws.
8. Position the servo heat shield over the servos and clip it to the pan rail.
9. Lower the vehicle.
10. Connect the battery ground cable.
11. Fill the transmission to the proper fluid level and check for proper transmission operation.
-
Use MERCON V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON (R) V specification.
