Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
7. CAUTION: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting
Ford specifications WSK-M2G351-A5 prior to installation.
Install a new differential pinion shaft lock bolt and tighten finger-tight.
8. Using the special tool, install the new differential bearings on the differential case.
9. Press the new anti-lock speed sensor ring and the ring gear on the differential case.
10. Install the ring gear bolts.
-
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to ring gear bolts.
11. Install the differential case.
Differential Case and Ring Gear-Traction-LOK
