Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Flex Plate: Service and Repair
Removal
1. Remove the transmission.
2. Remove the flywheel.
3. Clean and inspect the flywheel.
Installation
1. Note: Special bolts are used for flywheel installation; do not use standard bolts.
Install the flywheel.
-
Tighten the bolts in the sequence shown in two stages.
-
Stage 1: Tighten to 13 Nm (10 ft. lbs.).
-
Stage 2: Tighten 71 Nm (52 ft. lbs.).
2. Install the transmission.