Explorer 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Quarter Window Glass: Service and Repair
Quarter
REMOVAL
1. Remove the quarter trim panel.
2. Remove the rear quarter window glass.
1
Remove the ten nuts.
2
Carefully push the rear quarter window glass outward to release the butyl seal.
3. Remove the excess foam butyl from the window opening.
INSTALLATION
1. Apply 6 mm (0.23 in) foam butyl or equivalent meeting Ford specification WSB-M2G234-C to the rear quarter window glass frame.
^
Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
2. Install the rear quarter window glass.
1
Position the rear quarter window glass.
2
Tighten the ten nuts to specification.
NOTE: Loosely install the ten nuts before tightening.
3. Install the quarter trim panel.