Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Front Door Exterior Handle: Service and Repair
NOTE: Front door shown, rear door similar.
Heavy Duty Riveter
SPECIAL TOOLS
REMOVAL
1. Remove the door trim panel.
2. Remove the watershield.
3. Remove the outside door handle.
1. Disconnect the front door latch to door handle rod.
2. Drill out the two rivets and remove the outside door handle.
NOTE: The front door window glass must be completely up.
INSTALLATION
1. To install, reverse the removal procedure.
-
Use Heavy-Duty Riveter to install the rivets.