Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Vacuum Brake Booster: Service and Repair
Removal
1. Remove the brake master cylinder.
2. Disconnect the power brake booster hose.
1
Compress the clamp.
2
Disconnect the power brake booster hose.
3. Disconnect the brake pedal to power brake booster push rod.
1
Remove the self-locking pin.
2
Remove the stoplight switch and the brake booster push rod from the brake pedal pin.
3
Remove the brake booster push rod bushing.
4. Remove the bulkhead sound insulator.
5. NOTE: Support the power brake booster.
