Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Evaporator Core: Service and Repair
REMOVAL
NOTE:
-
To prevent refrigerant system contamination, if you are replacing the A/C evaporator core you must also replace the suction accumulator/drier.
-
If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle.
1. Disconnect the battery ground cable.
2. Recover the refrigerant. Please refer to Heating ad Air Conditioning/Service and Repair/ See: Service and Repair
3. Disconnect the A/C cycling switch.
4. Disconnect the electrical connectors.
1
Disconnect the A/C blower motor electrical connector.
2
Disconnect the A/C blower motor resistor electrical connector.
5. Disconnect the heater core.
1
Disconnect the heater water hoses.
2
Disconnect the heater water control valve vacuum hose.