Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Instrument Panel Circuit Board: Service and Repair
REMOVAL
WARNING: ILLUMINATION BULBS ARE PRESSURIZED AND MAY SHATTER IF IMPROPERLY HANDLED. WEAR EYE
PROTECTION WHEN REPLACING ILLUMINATION BULBS.
CAUTION: If gauges are being removed from the cluster assembly, do not remove the gauge pointers. Magnetic gauges cannot be recalibrated.
1. Remove the instrument cluster.
2. Remove the illumination and indicator bulbs.
3. Remove the gauges.
4. Remove the nineteen instrument gauge clips.
NOTE: Do not reuse instrument gauge clips.
5. Remove the instrument cluster printed circuit.
INSTALLATION
1. To install, reverse the removal procedure.