Explorer 2WD V6-245 4.0L VIN X SFI (1999)
2. CAUTION: Do not bend the manual valve inner lever pin.
Install the manual valve inner lever nut.
3. Install the manual valve detent spring.
4. Clean the extension housing and install a new extension housing gasket. Make sure that the parking pawl, spring, and shaft is correctly installed.
5. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the extension housing.
1
Position the extension housing.
2
Install the extension housing screws.
3
Install the extension housing stud.
6. If equipped, install the transfer case.