Explorer 2WD V6-245 4.0L VIN X SFI (1999)
14. Connect the TCC, SSD, SSB, and EPC solenoid electrical connectors.
15. CAUTION: Excessive pressure may break the retaining pins.
Install the wire loom guide and protector.
-
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire loom guide and protector.
16. Install the transmission fluid pan (7A194).
1
Install a new transmission fluid pan gasket on the transmission fluid pan.
2
Install and align the transmission fluid pan.
-
Loosely install the transmission fluid pan screws.
17. Using a crisscross sequence, tighten the transmission fluid pan screws.
18. Lower the vehicle.
19. Connect the battery ground cable.
20. Fill transmission to proper fluid level and check for proper transmission operation.
