Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Shift Cable: Service and Repair
Removal
1. Disconnect the transmission shift cable from the steering column.
1
Disconnect the shift cable from the transmission column shift selector tube.
2
Disconnect the shift cable from the steering column bracket.
2. Push the ruler grommet and transmission shift cable through the bulkhead.
3. Raise and support the vehicle.
4. Remove the transmission shift cable from the automatic transmission.
1
Disconnect the shift cable from the manual control lever.
2
Depress lock tabs to release shift cable and disconnect the shift cable from the shift cable bracket.
5. Remove the transmission shift cable bracket from the automatic transmission.
1
Remove the bolt.
2
Remove the transmission shift cable bracket.
Installation