Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Clutch Pedal Assembly: Service and Repair
Removal
1. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface wash it
immediately with water.
Disconnect the clutch master cylinder push rod.
2. Remove the retainer ring.
3. NOTE: When the clutch pedal shaft is removed from the bracket, the brake pedal, brake and clutch pedal bushings, and spring washer become
accessible.
Remove the clutch pedal from the pedal support bracket.
Installation