Explorer 2WD V6-4.0L VIN E (2001)
![background image](/ford/explorer_2wd/v6-4.0l_vin_e/Page-2882001.png)
Body / Frame Mount Bushing: Service and Repair
Body Support - Number 1
BODY SUPPORT - NUMBER 1
Materials
Material
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and Lower Insulator
1. Remove the door scuff plate.
2. Remove the A-pillar lower trim panel.
1. Remove the pin-type retainer.
2. Remove the A-pillar lower trim panel.
3. Position back the carpeting and remove the body insulator plug.
4. NOTE: This step may require holding the lower retainer with an appropriate tool.