ford Workshop Repair Guides

Ford Explorer Workshop Service and Auto Repair Manuals

Removal and Replacement|Page 8969 > < Removal and Replacement|Page 8967
Page 7
background image

Passenger Seat Cushion (Part 2)

Exploded View

Removal and Installation

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an airbag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

-

After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterwards.

-

Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.

NOTE:

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

Driver seat shown, passenger seat similar.

Removal and Replacement|Page 8969 > < Removal and Replacement|Page 8967