Explorer 2WD V6-4.0L VIN K (2007)
23. Install the heater hose tube bracket front bolt.
^
Tighten to 34 Nm (25 ft. lbs.).
24. Position the upper fan shroud and install the bolts.
^
Tighten to 7 Nm (62 inch lbs.).
25. Position the coolant expansion tank, install the bolts and connect the coolant overflow hose.
^
Tighten to 7 Nm (62 inch lbs.).
26. Position the power steering fluid reservoir and install the bolt.
^
Tighten to 7 Nm (62 inch lbs.).
