Explorer 2WD V6-4.0L VIN K (2007)
(2) Scroll down the menu and Choose Reset TCM KAM.
NOTE
FOR PDS, RESET 1CM KAM IS NOT THE SAME AS CLEAR TRANSMISSION ADAPTIVE TABLES, WHICH IS UNDER THE
POWERTRAIN - TRANSMISSION MENU TREE.
NOTE
UNHOOKING THE BATTERY WILL NOT CLEAR THE TCM KAM.
NOTE
DO NOT CLEAR THE PCM KAM.
4.
Verify that the transmission fluid temperature (TFT) PID is above 175° F (80°C). If it is not at 175° F (80° C), drive unit approximately 3 miles (5
Km) to reach temperature.
NOTE
TFT MUST BE AT 175° F (80° C) OR ABOVE BEFORE PROCEEDING TO STEP 5.
5.
Drive unit to perform adaptive shift strategy learn.
a.
Accelerate from rest with light throttle. The 1-2, 2-3, and 3-4 shifts must occur at engine speeds between 1300-1800 RPM.
b.
Continue to accelerate gently to 50 MPH (80 Km/h) so that the transmission shifts into 6th gear.
c.
Brake gently to a complete stop and hold foot on brake for at least 15 seconds.
d.
Repeat Steps (a-c) a total of five (5) times.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
072302A
2006-2008 Explorer,
0.9 Hr.
Mountaineer 2007-2008
Explorer Sport Trac 4.6L
6R60 Transmission: Check
DTCs, Reprogram The
PCM And TCM, Includes
Time To Clear KAM And
Perform Road Tests (Do
Not Use With 12650D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
04
Disclaimer