Explorer 2WD V6-4.0L VIN K (2007)
thread locking compound from the internal threads.
NOTE: Rotate the stabilizer bar and pull outward to remove.
Remove the 4 stabilizer bar bracket bolts and the stabilizer bar, and the brackets and bushings.
^
Discard the bolts.
^
To install, tighten to 55 Nm (41 ft. lbs.) at curb height.
6. NOTE: When installing the sway bar bushings onto the sway bar, match the groove in the bushing to the upset on the sway bar.
NOTE: Inspect the stabilizer bar bushings for wear or damage. Install new bushings as necessary.
NOTE: Tighten LH side first.
Remove the 2 stabilizer bar bushings.
7. To install, reverse the removal procedure.
