Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Alarm System Transponder: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the lower instrument panel steering column cover.
1
Remove the screws.
2
Remove the lower instrument panel steering column cover.
3. Remove the lower steering column shroud.
1
Remove the screws.
2
Remove the lower steering column shroud.
4. Remove the anti-theft transceiver module
1
Remove the screw from the bottom of the transceiver module.
2
Disconnect the electrical connector and remove the module.
NOTE: Only apply pressure or leverage below the key cylinder lower rib.
NOTE: The steering wheel has been removed for clarity.
INSTALLATION
1. To install, reverse the removal procedure