Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-2219002.png)
5. Disconnect the brake pedal motor electrical connector.
6. NOTE: Starting at the upper left-hand nut, tighten the nuts in a clockwise pattern.
Remove the brake pedal and bracket retaining nuts and bolts.
7. Position the brake booster assembly out of the way.
8. Remove the brake pedal and bracket.
9. CAUTION: The brake pedal and the accelerator pedal must be in the same position before installation. The pedals must be in the completely
rearward (away from the driver) position.
To install, reverse the removal procedure.