Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
1. NOTE: Lubricate the parts with clean engine oil before installing.
Install the camshaft.
2. NOTE: The camshaft bearing caps must be installed in the original position.
NOTE: After installing the bolts, check the camshaft for free rotation.
Position the oil supply tube, the camshaft bearing caps, and the bolts.
-
Tighten the bolts in the sequence shown in two stages.
-
Stage 1: Tighten the bolts to 6 Nm (53 inch lbs.).
-
Stage 2: Tighten the bolts to 16 Nm (12 ft. lbs.).
3. The camshaft must be retimed.
4. Install the camshaft roller followers.