Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
11. CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wires.
NOTE: Spark plug wires must be connected to the correct ignition coil terminal. Mark spark plug wire locations before removing them.
Disconnect the spark plug wires.
12. Remove the eight intake manifold retainers, then slightly reposition the manifold to access the EGR Vacuum Regulator (EVR) solenoid.
13. NOTE: Position the manifold forward to access connections.
Disconnect the EVR solenoid vacuum and electrical connections.
14. Disconnect the Knock Sensor (KS) electrical connector retainer.