Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-1100003.png)
12. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
13. Remove the wiring anchors and position the wiring aside.
14. Remove the wiring harness anchor and position the wiring aside.
15. Remove the thermostat housing.
1
Remove the bolts.
2
Release the bypass hose clamp.
16. Release the hose clamp and remove the lower heater water hose.