Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-1174003.png)
11. Using a suitable jackstand, support the converter assembly.
12. Remove the bolt and the isolator bracket.
13. Remove the four converter-to-manifold nuts and remove the converter assembly.
14. If necessary, remove the heated oxygen and catalyst monitor sensors.
Installation
1. NOTE: Make sure to apply anti-seize lubricant to the threads of the sensors before installation.
If removed, install the heated oxygen and catalyst monitor sensors.