Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Evaporator Case: Service and Repair
Auxiliary Climate Control
REMOVAL
NOTE:
-
Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C compressor or damage to the suction accumulator.
-
The auxiliary evaporator core is not separately serviceable. It is serviced only with the auxiliary climate control housing.
1. Recover the refrigerant.
2. Position aside the LH rear quarter trim panel.
3. Disconnect the condensation drain tube.
4. Remove the thermostatic expansion valve.
1
Disconnect the lines.
2
Remove the thermostatic expansion valve.
CAUTION: Use a backup wrench at the fitting to prevent damage to the evaporator core.
5. Disconnect the wiring harness.
1
Disconnect the electrical connectors.
2
Detach the electrical connector pin type retainer.