Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
1. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining nuts is critical for correct system operation.
NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
Position the RCM in place.
1. Position the RCM.
2. Install the nuts.
3. Connect the RCM electrical connectors.
4. Slide and engage the RCM electrical connector locking clips.
Vehicles built 03/2002 onward
2. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining nuts is critical for correct system operation.
NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
Install the RCM.
1. Position the RCM.
2. Install the nuts.
3. Connect the small RCM electrical connector.
1. Align the small RCM electrical connector.
2. Push in until the connector is fully seated into the RCM.