Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
5. Remove the LH C-pillar trim panel.
1. Pull out and release the retaining clips.
2. Pull out and release the retainer.
3. Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
All vehicles without side air curtains and safety canopies
6. Disconnect and remove the side air curtain bridge resistor.
Installation
All vehicles without side air curtains and safety canopies
1. Connect and install the side air curtain module bridge resistor.
Vehicles built 03/2002 onward
2. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Align the LH C-pillar trim panel hook to the opening in the sheet metal.