Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-2907006.png)
8. Install the upper steering column shroud.
1. Position the upper steering column shroud hard shell.
2. Position the front retaining clips and rotate the upper steering column trim panel down, engaging the rear retaining clips into the instrument
cluster finish panel.
9. Install the upper steering column shroud screw.
10. Position the lower steering column shroud and install the screws.
11. Install the gear selector boot.