Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-2985002.png)
4. Separate the secondary safety belt guide from the B-pillar.
1
Release the pin-type retainer.
2
Rotate the top of the secondary safety belt guide down and out of the B-pillar.
5. Using the special tool, remove the bolt. Remove the front safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure to tighten all nuts and bolts to specification.
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to align and install the safety belt retractor locating ear into the B-pillar sheet metal before installing the bolt.
2. Check the active restraint system for correct operation.