Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Seals and Gaskets: Service and Repair
Extension Housing Gasket
Extension Housing Gasket
Removal
1. Raise and support the vehicle.
2. Remove the driveshaft.
3. Support the transmission with a suitable Jack.
4. Remove the transmission support insulator nuts.
5. Remove the bolts from the transmission support insulator.
6. Raise the transmission and remove the transmission support insulator.
7. CAUTION: The parking pawl, parking pawl return spring and parking pawl shaft could fall out during removal of the extension housing.
Remove the extension housing.