Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Transmission Cooler: Service and Repair
Transmission Fluid Cooler Tubes
Transmission Fluid Cooler Tubes
Special Tool(s)
Removal
1. With the range selector in the NEUTRAL position, raise and support the vehicle.
2. Using a backup wrench, hold the case fitting secure. Disconnect the fluid cooler fittings.
3. NOTE: If equipped, remove the safety retainer from the connector.
Disconnect the cooler line.
^
If equipped, use the special tool to disconnect the quick coupler.
^
If equipped, loosen and remove the screw clamp from the hose.
4. Remove the trans cooler line bracket nut.