Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
16. CAUTION: If new bolts to retain the driveshaft to the axle are not available, coat the threads of the original bolts with Threadlock and Sealer
EOAZ- 19554-AA or equivalent meeting Ford specification WSK-M2G351 -A5.
CAUTION: The driveshaft flange fits tightly on the rear axle pinion flange pilot. To make sure that the driveshaft flange seats squarely on the
pinion flange, tighten the bolts evenly in a cross pattern as shown.
To install, reverse the removal procedure.