Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
Flywheel: Service and Repair
Flywheel
Flywheel
Removal
1. Remove the transmission.
2. Remove the flywheel.
3. Clean and inspect the flywheel.
Installation
1. NOTE: Special bolts are used for flywheel installation; do not use standard bolts.
Install the flywheel.
-
Tighten the bolts in the sequence shown in two stages.
-
Stage 1: Tighten the bolts to 13 Nm (10 ft. lbs.).
-
Stage 2: Tighten the bolts to 71 Nm (52 ft. lbs.).
2. Install the transmission.