Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
![background image](/ford/explorer_2wd/v6-4.0l_vin_k_flex_fuel/Page-2108002.png)
6. Disconnect the H02S sensor connector from the transmission case.
7. Disconnect the Output Shaft Speed (OSS) sensor electrical connector.
8. Remove OSS sensor.
1
Remove the OSS sensor screw.
2
Remove the OSS sensor from the transmission.
9. Inspect the OSS sensor O-ring for damage. If damaged, install a new O-ring.
Installation
All vehicles
1. Inspect and lubricate O-ring with petroleum jelly.
1
Install the OSS sensor into the transmission.
2
Tighten OSS sensor screw.