Explorer 2WD V8-302 5.0L VIN P SFI (1999)
Vanity Lamp: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the sun visor.
^
Position the sun visor as necessary.
^
Remove the sun visor screws.
3. Lower the sun visor and disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.