Explorer 2WD V8-302 5.0L VIN P SFI (1999)
Lock Cylinder Switch: Service and Repair
Anti-Theft Switch - Door Disarm, Liftgate Lock Cylinder
REMOVAL
1. Remove the liftgate trim panel.
2. Remove the watershield.
3. Remove the liftgate lock cylinder disarm switch.
1
Remove the "E" clip.
2
Disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
The liftgate lock cylinder disarm switch locator mark must be positioned towards the harness side of the switch prior to installation.
^
Depress the liftgate lock cylinder to install the liftgate lock cylinder disarm switch.