Explorer 2WD V8-4.6L (2008)
Second Row, 40 Percent Bench, Cushion
Removal and Installation
1. Release all of the seat backrest J-clips. Slightly raise the backrest trim cover.
2. Remove all of the staples in the backrest trim cover.
3. Pull the seat backrest material up and remove the 4 backrest bolts. Remove the backrest assembly.
-
To install, tighten to 23 Nm (17 lb-ft).
4. To install, reverse the removal procedure.
Seat Backrest - Third Row
SEAT BACKREST - THIRD ROW