Explorer 2WD V8-4.6L (2008)
![background image](/ford/explorer_2wd/v8-4.6l/Page-2582097.png)
Second Row, 40 Percent Bench, Cushion
Removal and Installation
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the cushion foam pad.
Release the hook-and-loop strips and remove the cushion trim cover from the cushion foam pad.