Explorer 2WD V8-4.6L (2008)
![background image](/ford/explorer_2wd/v8-4.6l/Page-1997001.png)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor - Defroster Door
VACUUM CONTROL MOTOR - DEFROSTER DOOR
Removal and Installation
1. Remove the audio control module (ACM).
2. Remove the lower steering column cover.
3. Remove the 3 center panel duct screws and position the center panel duct aside.
4. Remove the 2 plenum chamber screws.
5. Disconnect the defrost door vacuum control motor vacuum connector.
6. Remove the 2 defrost door vacuum control motor screws.
7. NOTE: The plenum chamber must be slightly repositioned to allow the defrost door vacuum control motor to be rotated far enough to clear the