Explorer 2WD V8-4.6L (2008)
![background image](/ford/explorer_2wd/v8-4.6l/Page-2773001.png)
Dome Lamp: Service and Repair
Interior Lamp - Front
INTERIOR LAMP - FRONT
Removal and Installation
1. NOTE: Use a small screwdriver to pry open the garage door opener bin.
Open the rear overhead console storage or garage door opener bin to access the retaining screw.
-
Remove the screw.
2. Pull the front of the overhead console down and remove the console from the console retaining clips.
-
Disconnect the electrical connector(s).
3. To install, reverse the removal procedure.