Explorer 2WD V8-4.6L VIN 8 (2006)
Trim Panel: Service and Repair
C-Pillar Trim Panel
C-PILLAR TRIM PANEL
Removal and Installation
1. Position the second row seat to the forward position.
2. Remove the C-pillar lower safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Position the door opening weatherstrip aside.
4. Remove the C-pillar trim panel.
5. To install, reverse the removal procedure.
-
Be sure the hole on the back of the C-pillar upper trim panel is seated over the upper safety belt anchor bolt.