Explorer 2WD V8-4.6L VIN 8 (2006)
Driver side
3. Remove the hood release lever.
1
Remove the screw.
2
Remove the hood release lever.
4. Remove the cowl trim panel.
1
Remove the pin-type retainer.
2
Remove the cowl trim panel.
All vehicles
5. To install, reverse the removal procedure.
D-Pillar Trim Panel
D-PILLAR TRIM PANEL
Removal and Installation
Vehicles with third row seating
1. Remove the rear cargo management system.
-
Remove the screw.
-
Remove the pushpin.
-
Remove the system.
2. Remove the D-pillar lower safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).