Explorer 2WD V8-4.6L VIN 8 (2006)
All seats
1. Remove the front seat and depower the supplemental restraint system (SRS).
2. Remove the seat track.
3. Remove the front seat backrest.
4. CAUTION: Use care when separating the seat back trim cover from the hook and loop strip, or the hook and loop strip can be torn from
the backrest foam pad.
Release the hook and loop strips, remove the hog rings and separate the cushion trim cover from the cushion foam pad.
Seat with heat
5. If necessary, remove the cushion heated seat mat and route out the wire harness through the cushion foam pad opening.
All seats
6. To assemble, reverse the disassembly procedure.
7. Install the front seat backrest.
8. Install the seat track.
9. Install the front seat and repower the SRS. If a passenger seat has been serviced, do not prove out the SRS at this time.
Passenger seat
10. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS. See: Restraint Systems/Air Bag
Systems/Testing and Inspection/Component Tests and General Diagnostics/Zero Seat Weight Test
Seat Cushion - Second Row, 40 Percent E-Z Entry
SEAT CUSHION - SECOND ROW, 40 PERCENT E-Z ENTRY