Explorer 2WD V8-4.6L VIN 8 (2006)
Radiator: Service and Repair
Radiator
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the coolant expansion tank.
4. Remove the bolt and position the power steering fluid reservoir aside.
^
To install, tighten to 10 Nm (89 inch lbs.).
5. Release the clamp and disconnect the upper radiator hose.
6. Release the clamp and disconnect the lower radiator hose.
7. Detach the lower radiator hose retainer from the lower fan shroud.
8. Detach the transmission cooler hose retainer from the RH radiator support bracket.
9. Remove the 4 lower radiator air deflector push pins.
