Explorer 2WD V8-4.6L VIN 8 (2006)
Oil Pan: Service and Repair
Oil Pan
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the front axle, if equipped.
3. Remove the stabilizer bar.
4. Remove the drain plug and drain the engine oil Install the drain plug when finished.
^
Tighten to 26 Nm (19 ft. lbs.).
5. Remove the nut and position the power steering pressure (PSP) hose bracket aside.
6. Remove the nut and position the battery cable bracket aside.
7. Disconnect the oil temperature sensor electrical connector.