Explorer 2WD V8-4.6L VIN 8 (2006)
3. Release the locking tab on the quick connect coupling.
4. Separate the quick connect coupling from the fitting.
Connect - Type III
1. Inspect the quick connect coupling and the tube for damage. Remove any dirt or obstructions.
2. CAUTION: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the
tube.
NOTE: Apply clean engine oil to O-ring seals.
Release the locking tab and install the quick connect coupling onto the fitting.
3. Position the locking tab into the latched position.