Explorer 2WD V8-4.6L VIN 8 (2006)
4. Remove the 3 harness locators from the generator bracket.
5. Remove the 4 bolts and the generator bracket.
-
To install, tighten to 10 Nm (89 lb-in).
6. Loosen the 2 bolts and position the generator aside.
-
To install, tighten to 25 Nm (18 lb-ft).
7. Disconnect the generator electrical connector.
8. Position the protective cover aside, remove the nut and position the generator B+ terminal aside.
-
To install, tighten to 9 Nm (80 lb-in).
9. Remove the generator.
10. If necessary, remove the nut and the generator pulley.
-
To install, tighten to 109 Nm (80 lb-ft).
11. To install, reverse the removal procedure.