Explorer 2WD V8-4.6L VIN 8 (2006)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major
service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
CAUTION: Orientation of the suspension fasteners is important. Make sure the fasteners are installed in the same direction as they were in when
removed.
1. Measure the distance from the center of the hub to the lip of the fender with the vehicle in a level, static ground position (curb height).
2. If equipped, remove the wheel speed sensor bolt and position the sensor aside.
3. Remove the parking brake shoes.
4. CAUTION: Do not loosen the halfshaft nut and washer until the wheel and tire are removed from the vehicle. Wheel bearing damage will occur
